Flagship structure
Alumawood Patio Covers in Yuma, AZ
Embossed wood-grain aluminum: the look of a timber cover with none of the sealing, warping, cracking or termites. It's what most Yuma patios end up with, and for good reason.
What Alumawood actually is
Alumawood is a brand of aluminum patio cover embossed with a wood grain and finished at the factory. The brand is now part of Four Seasons Building Products, and the finish carries a limited lifetime warranty against chalking, fading and peeling. From ten feet away it reads as painted wood. Up close it's a hollow aluminum extrusion that a termite has no use for.
In a market with roughly 4,055 hours of sunshine a year and about three inches of rain, that combination is hard to argue with. Wood in this climate is a maintenance relationship. Aluminum is a purchase.
The three versions, quickly
- Lattice. Open slats across the frame — roughly 60–70% shade, dappled light on the slab, the best airflow of the three, and the least expensive way to put a permanent structure over a patio.
- Solid. Closed pan roof. Blocks 100% of the sun and keeps rain off, with an integrated gutter that carries water off the edge of the slab instead of onto it.
- Insulated. Solid panels with a foam core, engineered to carry fans and lighting. It has its own page because it's a different product, not just a thicker version of the same one.
Those are the summaries. The head-to-head comparison — shade percentages, rain, airflow, fan support, upkeep — lives in the guide.
Still deciding between structures? Read Choosing Shade in the Sunniest City on Earth — the full side-by-side comparison.
What it costs
Typical national installed pricing runs about $18 to $55 per square foot. In practice that looks like:
- 10×10 lattice cover — from around $1,800
- Solid cover — commonly $2,000 to $3,500
- Insulated cover — commonly $3,600 to $5,500
Those are typical ranges, not quotes. Span length, post count, wall height, attachment method, footing depth and whether the roofline cooperates all move the number. We price your patio after we've stood on it.
How it attaches, and why that matters
An attached cover ties into the fascia or the wall and lands on posts set in footings. The engineering that gets reviewed is uplift — Arizona design wind standards sit around 115 mph under current codes, and monsoon wind lifts a roof before it pushes it sideways. Confirm specifics for your address with Yuma Building Safety. Nearly all new attached covers need a permit in both the city and the county, and many Foothills communities also want HOA architectural review. We prepare the drawings and file the submittals.
Where it goes next
If you want the coolest possible patio, read insulated patio covers. If the spot you actually sit in isn't attached to the house, look at freestanding ramadas. And if the home is a park model or sits on a resort lot, start with park model covers instead — different rules apply.
Alumawood questions we get
Is Alumawood the same as a generic aluminum cover?
No. Alumawood is a specific brand of embossed wood-grain aluminum patio cover, now part of Four Seasons Building Products, sold with a limited lifetime warranty on the finish. Plenty of aluminum covers exist; not all of them carry that finish system or that warranty.
Will the finish chalk or fade in Yuma sun?
The factory finish is built to resist chalking, fading and peeling — that's the main reason it dominates this market instead of painted wood. No finish is immune to 4,055 hours of annual sunshine, but this one is designed for it and doesn't need you to reseal anything on a schedule.
Lattice or solid — which should I get?
Lattice gives roughly 60–70% shade with dappled light and the best airflow, for the lowest cost. Solid blocks 100% of sun and rain and includes an integrated gutter. If you sit out there in July afternoons, solid or insulated. If you want a bright patio and a breeze, lattice.
Get an Alumawood cover priced for your patio
Give us the size and the sun angle and we'll tell you whether lattice, solid or insulated is the right call.
Mon–Sat, 7am–6pm (Arizona time, no DST)